ColorLight Receiving card 5A-75B
ColorLight Receiving card 5A-75B
| Brands | ColorLight |
| Product Code: | ColorLight-5A-75B |
| Reward Points: | 13 |
| Availability: | In Stock |
-
$13.50
- $14.00
5A-75B receiving card was Colorlight special introduced high performance product that designed for customers to save cost, reduce points of fault and failure rate.
Based on 5A receiving card, 5A-75B integrates the most common HUB75 interfaces, which is more reliable and more economical on the premise that ensure high-quality display.
Integrated HUB75 interface, more convenient with less cost.
Reduce the plug connectors, and reduce malfunction, lower failure rate.
Superior display quality: high refresh rate, high grayscale, and high brightness with the conventional chips.
Perfect performance under lower grayscale status.
Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.
Support 14 bits high-precision point-by-point calibration in the Brightness and the chromaticity.
Support conventional chips, PWM chips and lighting chips.
Support any scan mode from static to 1/32 scan.
Support any pumping point and data arbitrary offset to realize various freeform display, spherical display, creative display, etc.
Support 16 groups of RGB signal output.
Large load capacity.
Advanced design, high quality components, rigorous aging test, zero malfunction of final products.
Wide working voltage range with DC3.3~6V.
First adopt all components face up configuration to reduce damage.
Compatible with Gigabit NIC, S series Sender, Z series Sender, C series Sender, etc.
| Control system parameters | |
|---|---|
| Sending device | Gigabit NIC, S series Sender, Z series Sender, C series Sender, etc |
| Control area of every card | Full-color: 256*256 Pixels, for special applications the column can be extended to 1024 pixels |
| Correction area of every card | 256*256 Pixels |
| Cascade control area of the largest regional | 65536*65536 pixels |
| Cascade card number | 65536 PCS |
| Network port exchange | Support, arbitrary use |
| Synchronization | Nanosecond synchronization between the card and the card |
| Display Quality | |
|---|---|
| Refresh rate for conventional chip | Static: 64*64, up to 16000Hz 1/8 scan: 128*128, up to 10000Hz |
| Serial frequency | 0.2MHz-41.7MHz |
| Gray Level | Maximum 65536 levels |
| Minimum unit of OE values | 8ns, 8ns multiples steps |
| Gray scale compensation | Each level grayscale compensate separately |
| Display module compatibility | |
|---|---|
| Chip supports | Support conventional chips, PWM chips, lighting chips and other mainstream chips |
| PWM chip supports | Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc |
| Scan mode | Conventional mode and high refresh rate mode to support refresh rate multiplied |
| Scan type | Support static sweep to 1/32 scan |
| Module Specifications Support | Support 4096 pixels within any row, any column |
| The direction of the cable | Support route from left to right, from right to left, from top to bottom, from bottom to top |
| Data Groups | 16 RGB data groups |
| Data folded | Support to fold on the same or opposite direction, which improve refresh rate significantly |
| Data exchange | 16 data groups for any exchange |
| Module snapshot | Support any pumping point |
| Data serial transmission | RGB, R8G8B8, R16G16B16, etc in the form of serial |
| Compatible device and interface type | |
|---|---|
| Communication distance | UTP cable140M CAT6 cable170M Optic fiber: Single Mode Fiber Transceiver20KM Multi-Mode Fiber Transceiver 550M (Use RP Repeater to extend unlimited) |
| Compatible with transmission equipment | Gigabit switch, fiber transceiver, optical switches |
| DC power interface | Wire terminal |
| HUB Interface Type | HUB75 (Note: 32 scan with E signal) |
| Physical parameters | |
|---|---|
| Size | 143* 93mm |
| Input voltage | DC 3.3V-6V |
| Rated current | 0.6A |
| Rated power | 3W |
| Storage and transport temperature | -50 to 125 |
| Operating Temperature | -20 to 75 |
| Body static resistance | 2KV |
| Weight | 100g |
| Monitoring function (in conjunction with mutil-function card) | |
|---|---|
| Monitoring functions | Real time monitoring environment information like temperature, humidity, smog |
| Remote Control | Support for relay switch to turn on/off the power supply of equipments remotely |
| Pixel Level Calibration | |
|---|---|
| Brightness calibration | Support |
| Chromaticity calibration | Support |
| Other features | |
|---|---|
| Hot backup | Support, from A to B, and loop backup as well |
| Shaped screen | Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset |
Related Products
ColorLight Receiving card 5A-75E
5A-75E receiving card is Colorlight special introduced high performance product that designed for customers to save cost, reduce points of fault. Based on 5A receiving card, 5A-75B integrates the most..
-10%
ColorLight Receiving card i5A-905
i5A-905 is specially designed for the compact and portable LED displays, such as LED color screen or casting aluminum cabinet, etc. It inherits all the advantages and features i5A had. Meanwhile, i5A-..
led screen sending card ColorLight S2
As a new generation of sending card, S2 has updated its core chips, and the performance significantly improved. It adopts dual USB2.0 as the communication interface to achieve high speed communication..
ColorLight Multifunction Card iM9
System compatibilitySending deviceAll of Colorlights sending devicesReceiving deviceAll of Colorlights receiving devicesTransmission equipmentSupport Gigabit switch, Fiber ConverterNetwork Port Exchan..
LED screen Brightness Sensor ColorLight SSR-L29
Monitor environmental brightness, and auto adjust the brightness of LED display according to environmental brightness value and brightness adjustment strategy set up before, to achieve the aim of envi..
LED screen Temperature and Humidity ColorLight SSR-TEMP
SSR-TEMP is a high-precision temperature and humidity sensor with good-looking and small appearance, it is designed with standard guide rail structure and it has easy wire connection and simple i..
ColorLight X2 LED display controller
X2 is a professional LED display controller, it possesses powerful video signal receiving capacity, and supports multiple signal inputs, in which max input resolution is 1920*1200 pixels. Meanwhile, 2..
ColorLight X4 LED display box controller
X4 is a professional LED display controller, it possesses powerful video signal receiving capacity, and supports multiple signal inputs, in which max input resolution is 1920*1200 pixels. Meanwhile, 4..
ColorLight X4E LED display controller box
X4e controller is a professional control system and video processing equipment specially designed for LED engineering applications. It equips various video signal interfaces, supports high-definition ..
Pure cupper Data cable for led screen module
Data cable for led screen module, Pure cupper /fine copper cables,..
Plastic installing board For LED display Control card Min. Order 5 pcs
Plastic installing board For LED display Control card Min. Order 5 pcs..
led screen sending box ColorLight S2 sender
As a new generation of sender, S2 Sender has updated its core chips, and the performance significantly improved. It adopts dual USB2.0 as the communication interface to achieve high speed communicatio..
led screen sending box ColorLight S4 sender
S4 sender, possesses powerful video signal receiving capacity, and supports DVI and HDMI signal input, with max input resolution of 19201200 pixels. Meanwhile, 4 Gigabit Ethernet output ports support ..
led screen sending box ColorLight S6F sender
S6F HD Sender possesses powerful video signal receiving capacity, and supports DVI&HDMI HD signal input and loop output, with max input resolution of 19201200 pixels. Meanwhile, 6 Gigabit Ethernet..
ColorLight X1 LED display controller
X1 is a professional LED display controller, it possesses powerful video signal receiving capacity, and supports multiple signal inputs, with max input resolution of 19201200 pixels. Meanwhile, 2 Giga..
ColorLight X3 LED display controller
X3 is a professional LED display controller, it possesses powerful video signal receiving capacity, and supports multiple signal inputs, with max input resolution of 19201200 pixels. Meanwhile, 4 Giga..
ColorLight C3 LED display Player
As a new generation of LED controller, C3 can control LED screen without computer, it is convenient and cost-efficient. C3 adopts the industrial components and the embedded operating system, which is ..
ColorLight C2 LED display Player
C2 can connect to Internet through LAN/WiFi/4G. Based on Colorlight Cloud Server, C2 can rapidly achieve unified management of multiple screens and multi-services across regions. 1Interfaces2Feat..
ColorLight C6 LED display Player
C6 PlayerAs a new generation of LED controller, C6 Networked LED Player features a play mode without computers. C6 possesses all advantages of conventional synchronized controllers, C6 is built-in wit..
ColorLight C4 LED display Player
1Interfaces2Breakthroughs· Professional BS structure, can connect to Internet through LAN/WiFi/4G and achieve cloud services cluster management;·Maximum loading capacity: 655360 pixels; Maximum w..
Plastic installing board For LED display Control card LED card tray Min. Order 5 pcs
Plastic installing board For LED display Control card LED card tray..