SD Card 2048 LED Pixels Controller DC5~24V T-1000S t1000s RGB controller

SD Card 2048 LED Pixels Controller DC5~24V T-1000S t1000s RGB controller

BrandsZeroelecTech
Product Code:Controller-T-1000S
Reward Points:10
Availability:In Stock
  • $10.00

Description:
Memory card:

type:SD card

Capacity:128MB-2GB

Store file:*.led

Physical parameters:

Working temperature :-30-85degree celsius

Working voltage:DC5V / DC7.5-24V

Working power:2W

Weight:0.3kg

Size:L165mmW80mmH30mm

Signal port:3pin connect port

Package List:

T1000S Controller* 1piece

SD Card* 1piece

T-1000S System features
1.32-65536 Gray,Support software Gamma correction.

2.Support point, line, surface, rules and special-shaped handle.

3.Single-port output,can support 2048 pixels.

4.Multiple controllers can be cascaded together and work synchronous,

play back content stored in the SD card.

5.Compatible with single line or double line chips.

NOTE:

When T1000S controller load less than 512 pixels the frame rate can reach 30fps.

When T-1000s control more than 512 pixels the frame rate will slow down automatically.

 

Support IC (one IC symbolize a pixel point )

 

  

 

 Definition of buttons

 

Features:

1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it control 512  pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically

 

 

Connection diagram: 

Regulatory function button: 

System architecture diagram:

 

Specific parameters:
Memory Card:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led
Physical parameters:
. Weight:0.2kg
. Size:122mm*67mm*25mm
. Temperature :-40-85 Degree
. Volgate: DC5V / DC7.5-24V
. Power:3W

 

Note:
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.

NOTE:For the TTL(SPI) signal, the controller signal ground must connect to

the LED lamp ground directly.

package:

1xT1000S controller

1xSD Card(128MB)

item picture








Write a review

Note: HTML is not translated!
    Bad           Good

Tags: RGB LED Pixels Controller T-1000S