ColorLight Receiving card 5A-75B
ColorLight Receiving card 5A-75B
5A-75B receiving card was Colorlight special introduced high performance product that designed for customers to save cost, reduce points of fault and failure rate.
Based on 5A receiving card, 5A-75B integrates the most common HUB75 interfaces, which is more reliable and more economical on the premise that ensure high-quality display.
Integrated HUB75 interface, more convenient with less cost.
Reduce the plug connectors, and reduce malfunction, lower failure rate.
Superior display quality: high refresh rate, high grayscale, and high brightness with the conventional chips.
Perfect performance under lower grayscale status.
Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.
Support 14 bits high-precision point-by-point calibration in the Brightness and the chromaticity.
Support conventional chips, PWM chips and lighting chips.
Support any scan mode from static to 1/32 scan.
Support any pumping point and data arbitrary offset to realize various freeform display, spherical display, creative display, etc.
Support 16 groups of RGB signal output.
Large load capacity.
Advanced design, high quality components, rigorous aging test, zero malfunction of final products.
Wide working voltage range with DC3.3~6V.
First adopt all components face up configuration to reduce damage.
Compatible with Gigabit NIC, S series Sender, Z series Sender, C series Sender, etc.
|Control system parameters|
Gigabit NIC, S series Sender, Z series Sender, C series Sender, etc
|Control area of every card||Full-color: 256*256 Pixels, for special applications the column can be extended to 1024 pixels|
|Correction area of every card||256*256 Pixels|
|Cascade control area of the largest regional||65536*65536 pixels|
|Cascade card number||65536 PCS|
|Network port exchange||Support, arbitrary use|
Nanosecond synchronization between the card and the card
|Refresh rate for conventional chip|
Static: 64*64, up to 16000Hz
1/8 scan: 128*128, up to 10000Hz
|Gray Level||Maximum 65536 levels|
|Minimum unit of OE values||8ns, 8ns multiples steps|
|Gray scale compensation||Each level grayscale compensate separately|
|Display module compatibility|
Support conventional chips, PWM chips, lighting chips and other mainstream chips
|PWM chip supports||Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc|
|Scan mode||Conventional mode and high refresh rate mode to support refresh rate multiplied|
|Scan type||Support static sweep to 1/32 scan|
|Module Specifications Support||Support 4096 pixels within any row, any column|
|The direction of the cable||Support route from left to right, from right to left, from top to bottom, from bottom to top|
|Data Groups||16 RGB data groups|
|Data folded||Support to fold on the same or opposite direction, which improve refresh rate significantly|
|Data exchange||16 data groups for any exchange|
|Module snapshot||Support any pumping point|
|Data serial transmission||RGB, R8G8B8, R16G16B16, etc in the form of serial|
|Compatible device and interface type|
UTP cable140M CAT6 cable170M
Optic fiber: Single Mode Fiber Transceiver20KM
Multi-Mode Fiber Transceiver 550M (Use RP Repeater to extend unlimited)
|Compatible with transmission equipment|
Gigabit switch, fiber transceiver, optical switches
|DC power interface||Wire terminal|
|HUB Interface Type||HUB75 (Note: 32 scan with E signal)|
|Input voltage||DC 3.3V-6V|
|Storage and transport temperature||-50 to 125|
|Operating Temperature||-20 to 75|
|Body static resistance||2KV|
|Monitoring function (in conjunction with mutil-function card)|
|Monitoring functions||Real time monitoring environment information like temperature, humidity, smog|
|Remote Control||Support for relay switch to turn on/off the power supply of equipments remotely|
|Pixel Level Calibration|
|Hot backup||Support, from A to B, and loop backup as well|
|Shaped screen||Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset|